Analysis of Hotmix AC-WC Mixture Using Materials from Lagadar Quarry and Baleendah Quarry for Road Planning Design
DOI:
https://doi.org/10.32832/astonjadro.v14i3.15719Keywords:
AC-WC hotmix; AASHTO 1993 method; Marshall testing; asphalt testing.Abstract
The material for the AC-WC hotmix mixture will affect the quality of the AC-WC hotmix itself. In the Bandung City area and its surroundings, materials for the AC-WC hotmix mixture are usually used which are taken from the Lagadar quarry and Baleendah quarry. Therefore, testing is carried out with the aim of comparing the quality of the material from which quarry is better between the two quarries. In addition, testing is needed on the asphalt that will be used because it will also affect the quality of the AC-WC hotmix asphalt produced, and testing is needed on the AC-WC hotmix sample itself by conducting a marshall test. Then the pavement thickness calculation is carried out using the AASTHO 1993 method to determine the thickness of the flexible pavement. Based on the results of the tests that have been carried out on the AC-WC hotmix mixture material taken from the two quarries, the results are quite good, both meet the required specifications. In addition, the test results on the 60/70 pen asphalt used also showed good results because all test results carried out met the specifications according to the existing SNI. The results of the marshall test on the two AC-WC hotmix samples produced showed good results. All marshall parameters for the two samples met the required specifications, but of the two AC-WC hotmix samples, the AC-WC hotmix sample with mixed material from the Baleendah quarry had better marshall parameter values.
References
Undang-Undang Republik Indonesia Nomor 22 Tahun 2009 Tentang Lalu Lintas Dan Angkutan Jalan
SNI 1969: 2008
SNI 03-6819-2002
Sukirman, Silvia; 2010 “Perencanaan Tebal Struktur Perkerasan Lentur” Penerbit Nova Bandung
Sukirman, Silvia; 2003 “Beton Aspal Campuran Panas”Penerbit Granit, Bandung
Syafaruddin, A. S., & Azwansyah, H. Perkerasan Campuran Aspal Ac-Wc Terhadap Sifat Penuaan Aspal. JeLAST: Jurnal PWK, Laut, Sipil, Tambang, 5(2).
SNI 06-2489-1991
ASTM D 1559-76
Bancin, E. D. L., Lubis, K., & Mahda, N. (2021). Pengaruh Penggunaan Tanah Merah Sebagai Filler Pada Campuran Aspal Ac-Bc Terhadap Nilai Marshall. Journal Of Civil Engineering Building and Transportation, 5(1), 17-25.
Junaedi, D. R. (2020). Pengaruh Penggunaan Pasir Kuarsa Sebagai Bahan Pengganti Agregat Halus Untuk Perkerasan Laston Ac-Bc. Jurnal Student Teknik Sipil, 2(2), 109-117.
AASHTO 1993
Irianto, I., & Warayaan, J. R. (2019). Perencanaan Tebal Perkerasan Lentur Dengan Metode Aashto 1993 Dan Mdp Jalan 2013 Pada Ruas Jalan Pirime-Balingga Kabupaten Lanny Jaya (Sta 0+ 000 S/D Sta 7+ 500). Jurnal Portal Sipil, 8(2), 83-95.
Farida, I., & Hakim, G. N. (2021). Ketebalan Perkerasan Lentur Dengan Metode Aashto 1993 Dan Manual Perkerasan Jalan 2017. Jurnal Teknik Sipil Cendekia (Jtsc), 2(1), 59-68.
Direktorat Jenderal Bina Marga. (2018). Spesifikasi Umum Untuk Pekerjaan Konstruksi Jalan Dan Jembatan (Revisi 2). Kementerian Pekerjaan Umum Dan Perumahan Rakyat.
Manual Desain Perkerasan Jalan Tahun 2017 No. 02/M/BM/2017 Kementerian Pekerjaan Umum dan Perumahan Rakyat Direktorat Jenderal Bina Marga
Pedoman Perencanaan Tebal Perkerasan Lentur (PT T-01-2002-B)
Surat Edaran Menteri Pekerjaan Umum No. 12/SE/M/2013 Tentang Pedoman Perencanaan Tebal Perkerasan Lentur.
Tahir, A. (2009). Karakteristik Campuran Beton Aspal (AC-WC) dengan menggunakan variasi kadar filler abu terbang batu bara. SMARTek, 7(4).
Tarigan, G. (2019, May). Pengaruh Penggunaan Agregat Alam Pada Campuran Aspal Beton Terhadap Marshall Properties. In Seminar Nasional Teknik (SEMNASTEK) UISU (Vol. 2, No. 1, pp. 170-173).
Hari Shofia, M., Susanto Haryadi, E., & Syaiful, S. (2021). ANALISIS KONDISI INTERFACE ANTARA WEARING COURSE DAN BINDER COURSE DENGAN MENGGUNAKAN PROGRAM CIRCLY 5.0. ASTONJADRO, 1(2), 14–28. https://doi.org/10.32832/astonjadro.v1i2.787
Akbardin, J., & Sukma Permadi, G. (2014). KAJIAN PENGGUNAAN FILLER KAPUR PADA AC-WC HALUS SPESIFIKASI JALAN BINA MARGA 2010. ASTONJADRO, 3(2), 43–51. https://doi.org/10.32832/astonjadro.v3i2.814
Triyanto, T., Syaiful, S., & Rulhendri, R. (2020). EVALUASI TINGKAT KERUSAKAN JALAN PADA LAPIS PERMUKAAN RUAS JALAN TEGAR BERIMAN KABUPATEN BOGOR. ASTONJADRO, 8(2), 70–79. https://doi.org/10.32832/astonjadro.v8i2.2628
Susanto Hariyadi, E., & Rulhendri, R. (2020). PENGARUH JENIS PEMBEBANAN DALAM ANALISIS STRUKTUR PERKERASAN LENTUR TERHADAP KINERJA PERKERASAN. ASTONJADRO, 2(2), 49–57. https://doi.org/10.32832/astonjadro.v2i2.798
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 ASTONJADRO
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Paper submitted to ASTONJADRO is the sole property of the Astonjadro Journal. Unless the author withdraws the paper because he does not want to be published in this journal. The publication rights are in the journal Astonjadro.ASTONJADRO
LICENSE
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Based on a work at http://ejournal.uika-bogor.ac.id/index.php/ASTONJADRO
