Asphalt 60/70 Penetration Analysis of AC/BC Mixture With the Addition of Ethylene Vinyl Acetate (EVA) As Asphalt Raw Material
DOI:
https://doi.org/10.32832/astonjadro.v12i2.9424Keywords:
Ethylene Vinyl Acetate (EVA), Test Marshall, Campuran AC/BCAbstract
This study was conducted to determine how much influence EVA (Ethylene Vinyl Acetate) added to Laston AC-BC has on Marshall characteristic values. The Marshall test carried out will produce stability values at the optimum asphalt conditions that meet the 2018 Highways specifications. The stability value will be used to analyze changes in the characteristics of the Laston AC-BC (Asphalt Concrate – Binder Course) mixture after adding a mixture of EVA (Ethylene Vinyl Acetate) . To determine an aggregate gradation in the AC-BC mixed layer, coarse aggregate is used in the form of crushed stone with a maximum size of ” while for fine aggregate it is a mixture of crushed stone, stone ash and sand. The additive or modifier used is EVA (Ethylene Vinyl Acetate) polymer. Next, to obtain good asphalt concrete, the gradation of the aggregate must meet the general specifications of Bina Marga 2018 which have been determined through SNI-ASTM-C136-2012. In making the test object, ± 1200 gram of aggregate and asphalt are needed so that the specified height of the test object will be produced. Through the analysis of the aggregate sieve, the weight of the aggregate required for the test object can be calculated. Modification of asphalt with EVA aims to determine the stiffness and properties of asphalt in resisting loading with a certain penetration value so as to produce a Penetration Index value which will affect the characteristics of asphalt against weather changes. Research and knowledge related to the addition of a mixture of EVA (Ethylene Vinyl Acetate) to asphalt can be further developed so that it can be implemented on types of road pavements with higher traffic density conditions.
References
Dwi, M., Aljnude, B. M., & Setyawan, A. (2015). Perencanaan Dan Pengujian Aspal Penetrasi 60 / 70. 145–150.
Handayasari, I., Sepriyanna, I. S., & Kusumastuti, D. P. (2020). Pengaruh Penggunaan Bahan Limbah Polimer Sebagai Campuran Aspal Modifikasi Terhadap Kinerja Marshall. Forum Mekanika, 9(1), 27–33. https://doi.org/10.33322/forummekanika.v9i1.1098
Industri, J. T., Sains, F., Propertis, T., & Eva, P. (1991). PENGARUH POLIMER EVA ( ETHYLENE VINYL ACETATE ) TERHADAP KINERJA CAMPURAN LAPIS ANTARA ( AC-BC ). 1–8.
Iqbal, D., Ramadhani, F., Teknik, P., Universitas, S., Prodi, A., Sipil, T., & Almuslim, U. (2010). KARAKTERISTIK CAMPURANASPAL BETON DENGAN SUBSTITUSI LIMBAH ETHYLENE VINYL ACETATE MENGGUNAKAN GRADASI TERBUKA. 6(1), 39–48.
Kurniawan, R., & Setyawan, A. (2016). Pengaruh Bitumen Modifikasi Ethylene Vinyl Acetate ( Eva ) Pada Asphalt Concrete Dan Thin Surfacing Hot Mix Asphalt Terhadap Pengujian Unconfined Compressive Strength ( Ucs ) Dan Indirect Tensile Strength ( Its ). Jurnal Matriks Teknik Sipil, 585–590.
Limbah, P., Minuman, K., & Dari, D. (2021). KARAKTERISTIK MARSHALL DAN UJI PENETRASI. 1(1), 49–58.
Saleh, S. M., Pengajar, S., Teknik, J., Aceh, B., Isya, M., Pengajar, S., Teknik, J., Aceh, B., Fahmi, R., Magiter, M., Sipil, T., & Aceh, B. (2016). Pengaruh Pengunaan Limbah Ethylene Vinyl Acetate ( Eva ) Sebagai Substitusi Aspal Untuk Meningkatkan Durabilitas Laston Ac-Wc. October, 11–13.
Saleh, S. M., S, F. M., Jurusan, M., Sipil, T., Kuala, U. S., Sipil, J. T., & Kuala, U. S. (2019). Substitusi Buton Rock Asphalt dan Polimer Ethylene Vinyl Acetate Terhadap Durabilitas Campuran Laston Lapis Aus dengan Rendaman Air Berlumpur. 1(2), 100–106.
Sistra, M. D., Setyawan, A., & Sarwono, D. (2016). Analisis Karakteristik Modifikasi Aspal Penetrasi 60/70 Dengan Ethylene Vinyl Acetate (Eva). E-Jurnal Matriks Teknik Sipil, 120–127.
Suparma, L. B., Yosevina, & Laos, D. S. (2015). Pengaruh Penggunaan Aspal Modifikasi EVA (EVA-MA) pada Perancangan Campuran Beton Aspal. The 18th FSTPT International Symposium, l.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 ASTONJADRO
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Paper submitted to ASTONJADRO is the sole property of the Astonjadro Journal. Unless the author withdraws the paper because he does not want to be published in this journal. The publication rights are in the journal Astonjadro.ASTONJADRO
LICENSE
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Based on a work at http://ejournal.uika-bogor.ac.id/index.php/ASTONJADRO